dbrinza

May 312014
 

Team 980 linked up with Boy Scout Troop 351 for the 2014 Scout Expo, held at the Rose Bowl in Pasadena on Sat May 31. We created a very popular exhibit: “You can be an Engineer!” for earning the Webelos Engineer Activity Badge.

Team 980/Troop 351 Exhibit at 2014 Scout Expo

Team 980/Troop 351 Exhibit at 2014 Scout Expo

 

Thousands of scouts saw our exhibit and learned about what engineers do: create the future! Webelos interviewed engineering mentors from Team 980, experienced “hands-on” exhibits for electrical circuits and generators, block and tackle pulleys, and took home a miniature catapult they constructed from tongue depressors, rubber bands and a plastic spoon.

Team 980 demonstrated our 2014 robot, which attracted a lot of attention when we catapulted the ball. Our sister robotics team, Team 2404, brought a T-shirt cannon, which was also a big hit!

We had a great time with Troop 351 and look forward to doing this again!

Mar 252014
 

What an incredibly exciting finish to our season! Team 980 was just one win away from qualifying for the FIRST World Championship!

Courtesy of Sean Hiller, Daily Breeze

Courtesy of Sean Hiller, Daily Breeze

Team 980 struggled with a few technical problems and challenging alliance pairings in the qualification matches but managed to finish with a 5 – 5 record. We played well with strong alliance partners and scored consistently in autonomous mode. Our driving and defense was also crisp. Those factors, along with a history of being a dependable partner, resulted in Team 980 being selected by #1 alliance: Team 330 BeachBots and Team 973 Greybots.

Our alliance breezed through the quarterfinals and semifinals without a loss. We lost the first finals match in a very close game 157-165. We came back strong to win the second match, 181-126, but fell short in the final match of the day 146-236. Still, we end our official season on a very high note and should be proud of our accomplishments.

Team980_LARegionalFinalists_2014

Mar 112014
 

Team 980 made a good showing at the Inland Empire Regional on March 1 – 2. We finished #17 out of 40 teams, were selected for eliminations, where we played with the #5 alliance in quarterfinals!

Robot_Field_IE_crop

Our ball pick-up was very effective and the drive system worked well with higher speed gearing installed at the event. We competed in 15 matches this weekend! We completed assembly of the catapult and executed test firings on the practice field. We need to make some adjustments to launch balls accurately and reliably, so we removed the assembly from the robot to finish it in the next two weeks. We worked hard and accomplished a lot at our first event this season!

Feb 192014
 

Team 980 wrapped up (literally!) our build season last night, putting our 2014 robot in the bag:

Robot_in_Bag

Before sealing the bag, we ran some tests with the robot and did a “fit-check” of our catapult mechanism on the competition robot. Here’s a photo of the robot before removing the catapult hardware:

Robot_with_Ball

We will continue to work on the catapult and deliver it to competition as part of our withholding allowance. The catapult is designed to attach to the robot very easily, so we should be competition-ready on inspection day for the Inland Empire Regional (Feb 28 – Mar 2)

Go Team 980!!

Feb 162014
 

Here’s a CAD rendering of the mechanical design of FRC Team 980′s 2014 robot:

FRC980_2014_Robot_CAD

The catapult is driven by two sets of compression springs housed in the green tubes. A van door motor drives the catapult winch, which is engaged/released by an idler gear driven by a pneumatic piston. The ball pick-up roller is shown in red (design inspired by Team 16′s 2008 robot). The electronics, battery and pneumatics (not shown) are housed in a “belly pan” mounted to the chassis frame below the ball. The robot has a very low center-of-gravity and has plenty of weight margin (and provisions for mounting ballast below the chassis frame).

Jan 262014
 

Team 980 is working hard to meet the 2014 Aerial Assist challenge!

We’ve made a prototype of our ball pick-up mechanism. Here’s a short video clip of it in action:

We are now meeting every weekday to get back on schedule. We had to slip our design review a few days to mature our ball shooter concept.

Here’s our updated build schedule:

BuildSeason_Schedule_Update_3

We’ve got 3 weeks to get our robot ready for the “pre-bag” scrimmage – it’s “CRUNCH TIME!!”

Jan 162014
 

Our lead controls student, Keiran, has deployed a private forum for team collaboration.

Team 980 members apply by clicking on the “Forums” menu tab on this website (look in the upper right) and filling out a tiny application (email address, username, password and reason for joining forum).

Our forum is built on “Vanilla” and allows categorized discussions, comments and file upload.

All team members are strongly encouraged to join!

Jan 072014
 

Team 980 jumped into the 2014 FRC season at its annual Kickoff Event held Sat Jan 4 at our robot build site: 907 Flower St in Glendale.

Team members (mentors and students) introduced themselves in our meet-and-greet session. Mentors described their background, current job and why they are supporting Team 980. Students told members what school they attend and what kind of careers are interesting to them.

We then discussed our team organization structure and build season schedule. Our schedule is shown below.

Team 980 2014 Build Schedule

Team 980 2014 Build Schedule

 

We watched the Aerial Assist game animation, ate some pizza and assigned our first homework: Read the Game Manual!

 

Nov 262013
 

Team 980 is cancelling our Tues Nov 26  PM meeting.

Tomorrow afternoon, President Obama’s is visiting DreamWorks Animation (across Flower St from our build site). Access to this area will likely be highly restricted. Team 980 made no special arrangements for access in advance of the event.

Hope everyone has a happy and safe Thanksgiving holiday!