An On-Time Update!

Today was pretty fun! We had many new members coming in who, initially, weren’t sure what to pick (Fab, design, etc.). So, after a quick tour of the space, our mentor Robin decided to have them sort parts for Fabrication. It took us a while to sort the parts generally by what they were, and then we got into the nitty-gritty and started sorting by size, all while talking about school and our other weekend plans.

After that, the entire team convened to discuss team business and safety protocol. Our mentor, Andrew, also showed us a video explaining the Crescendo 2024 game and let the 2024 Championships Final 1 video play as he described the teams and their strategies!

Next was lunch, which consisted of boxes upon boxes of Domino’s Pizza, salad, and lemonade! We split into groups at different tables, and then it was back to sorting parts, designing, and programming.

Controls started arranging the robot’s electronic parts on cardboard. Programming had coded the general path of our robot in the first 15 seconds while it was still autonomous, but still needed to program when the robot had to pause! The Design team was planning the gear design for a tilted shooter, a note collector under the bumper, and drawing the drive base with 80/20 aluminum beams.

That’s all that really happened this meeting. We’ve only got a few weeks until our competition, but we’re making good progress! 🙂

— Hannah, member of Business in Team 980

90 Days In

Hi everyone!

We’re finally back after six months! Sorry for the bizarre blogging schedule; we’ll try to keep it as consistent as possible.

The school year has started, so we’ve been getting more serious about working on robots and getting the ball rolling. Just yesterday was the JBHS Club Rush, and we got 13 sign up signatures!! The BHS club rush is coming up too, so we hope to get even more students interested.

If you’re want to know what it’s like as a new member on the team, here’s my experience so far:

Prior to joining Team 980, I worked with Legos, tiny robots, and Scratch block programming in FLL. But now, I’m in a massive workspace with soldering irons, drills, and bandsaws, so forgive me if I’m not writing about everything; it’s all new to me!

Even so, all the team members and mentors have been very welcoming and understanding. I’ve been given a quick tour around, have peeked into the team’s snack bin, and have watched as other people discussed different parts while they modeled a robot. Another member of Fabrication, Zoe, even let me try using the soldering iron (under her watchful eye, of course).

I’ve joined the Business team and started working on updating the website/rewriting things with Mia, who’s a part of Controls & Business. We’ve been delegated with the task of keeping this blog up to date, so hopefully, you guys will get timely updates about everything going on here! I’m really excited to continue being a part of this team and eventually go to competition!!

— Hannah, Member of the Business Team on Team 980

So… ok to be fair we were kind of busy

Yeah, I know. I SAID I would be posting more. Yep, that didn’t go as planned. But then again, the “plan” got thrown out a while ago and ended us up where I never thought we would go this year.

Ok, before you say “you don’t have any faith in your team”, let me explain.

At the time of this writing, it is my 19th year as a mentor in FIRST. In that time, my teams have been to finals twice but never won. Some robots have been better than others, and some of the best still lost out in the playoffs, sometimes without even being picked to be in the playoffs. So going into competition this year, I think it was understandable that I was far from expecting what happened. Admittedly, the 2024 is one of the best robots I have been a part of making and the 2024 team is one of the best I have had the privilege of mentoring, but still I never thought it would go the way it did.

We had the usual problems, making things fit, redesigning quickly, abandoning ideas for new ones, then abandoning them for even newer ideas. It was a miracle we got it done before the week 1 event we ended up attending. The usual first regional problems arose, lack of practice, lack of tuning, sensor calibrating between matches. Our first few matches were dreadful, but by the end we had worked out most of the problems and were doing pretty good. We weren’t picked, but understandable with such a poor showing at the beginning. No big deal, this is why we do two regionals whenever possible. We went home and fixed what was broken and further refined and tuned the robot.

Then came LA Regional. From the first practice matches, we could already tell this was not going to be a repeat of our first regional. The robot could score at range, run a much better autonomous, and climb every time. When something broke, we replaced it, when it didn’t behave, we recoded it. All through the competition, the attitude in the pit was very different. No mad scrambles to make it work, now it was routine maintenance and wondering when our next match is. This is a rare state for us, no panic building, just ready for more. Of course a couple major breakdowns happened on the field, mostly due to loose or broken wires. We still ran, but it shut down our shooter. Others were getting their hopes up but I had been down that path of disappointment too many times, and I kept my expectations low. So many good robots had gone this way, I expected to, as usual, walk away from alliance selection to have a leisurely lunch and then start packing.

Until… lunch got a whole lot shorter.

I couldn’t believe when “980” was called by the first seed alliance! The top team at the regional wanted us to come help them win. I was in shock, and apparently so was the rest of the team because there wasn’t a sound from anyone for a good 5 seconds. After coming out of the shocked silence and more than the appropriate amount of screaming, the entire pit crew ra- I mean walked very carefully back to the pits and our robot to begin maintenance again. Immediately, we were in trouble. One of our swerve pods was down. No time to fix, we put on a spare that had been taken off earlier and was not in top shape itself. They almost had to call in a backup but we got it working just in time.

We won that first match, but we weren’t that much help. We took a super hard hit which knocked loose the radio line (we think) disabling us for half the match. We came back on line with enough time to do the endgame climb, but it didn’t work either. After, we found that one of the climbers was bent with no time to repair. The radio wire was replaced along with several other commonly disabling electrical connectors (complete with hot gluing them down that did not sit well with everything my electrical engineering background stood for…) Our driver was given instructions to avoid hits like that again, and to remember that this robot is about speed and evasion, not direct confrontations. He was up to the challenge executing spins as he crossed the field preventing any robot from getting a solid hit on any side and spinning past any defender rolling off them like a wheel. He kept the robot away from attacks and began scoring as fast as he could get across field. We ended up getting one of the highest scores in the regional right before going into finals, not having lost a single playoff match.

Once we got to finals, we knew the team facing us would be tough. They played a lot of defense and drew a lot of fouls from their opponents in the process. Our alliance decided to change tactics. Our shooter was good, but our aiming system was slow so shots took longer than needed. But we were also fast, hard to defend, and has an excellent game piece collector. Rather than shoot what we grabbed, we would shuttle pieces across field to the other two teams so they could use their faster shooters to get even more in and minimize the defense that could be played against them. They could be shooting our piece while we were already running back for another, making our alliance and even quicker scorer than before. Even after winning the first finals match, in the back of my head I couldn’t believe what was happening. I still couldn’t believe when we won the second, finishing on top, winning a regional, something that in 19 years I had never been part of. I didn’t even move right away, I just sat there in the stands with my jaw dropped in disbelief.

So, yeah. We won a regional. My first ever, and the first for the team since 2008. Sorry I wasn’t updating this all throughout the robotics season, but it was for a good cause. Now we have to work out how to get the team to the championships. Those are good problems to have.

And I PROMISE I will keep all of you updated about how champs goes. Maybe I will even have time to tell you about our preparations. Will do my best

-Alex
Co-Lead Mentor Team 980 Thunderbots

No seriously, we do still exist!

So for any of you who follow our blog… Wow! You must really like us because we kind of dropped off the planet for a while. Don’t worry, we will do better from now on.

Meanwhile let me catch you all up from… seriously it was JULY since we posted last??? I had to look it up! Ok so to start off, we did NOT do any off season competitions. It turns out that somehow we missed the deadline for signing up and didn’t know it. We still did our Build Season 2.0 as a practice but the results did not get to compete. And that result? A WORKING SWERVE DRIVE!!!! Well… it WAS working until one of the gears slipped off and jammed a swerve pod. So it hasn’t ACTUALLY worked since August when we had to take them apart to fix them. And what was the sage advice from the manufacturer as to how to keep the gear from slipping off? “Put some glue on it…” Yeah… that’s what we got. And we did it too, as well as built a better drive base while we were at it. So it is ready to test right now, except… well we have been kind of busy as of late. Let me tell you about it. Don’t worry, I’ll be quick. You’re probably already thinking this is too long but hey, this is 4 months of catch up here. So…

In September we rebuilt the swerve Drive base and called it PS2 (Prototype Swervebot 2 not the popular game console) along with learned a new CAD program and prototyped a bunch of telescoping arms.
In October we took our robot to scare- I mean help families choose just the right pumpkin at the Gain FCU pumpkin Patch. We also participated at the Engineering Expo 2023 with team 589 and California State Senator Anthony Portantino to show the community exactly what robotics is all about.
In November we opened our workshop doors and invited the Burbank community and businesses to come meet us and see what we do. (There may have been some time off to eat large amounts of turkey in there too)
And in December we hosted the brand new FIRST Lego League Regional Competition in Burbank! Something we intend to do annually. Then, just this last weekend, our robot was working again, with a bunch of team 980 Santa helpers, helping to collect toys for the Spark of Love Toy Drive put on by the Burbank Fire Department.

Like I said, it’s been a busy 4 months. This week, preseason ends with our traditional family pot luck. I’ll tell you all about that next week along with some thoughts about the past season and the new season coming up way too fast.

So see, we really were here all along, and all the excitement that you missed is nothing compared to what is to come. Stay tuned!

-Alex
Co-Lead mentor

Popsicles in California Heat

“Burbank Young Professionals: Grill and Give,” Johnny Carson Park, Summer, Off-season, 2023

Hot. But we had popsicles so it was pretty sweet. 

Besides that, we had a nice time hanging out with one another, meeting with important Burbank figures such as the Boys and Girls Club, Department of Parks and Rec., and California Senators Portantino and Menjivar while doing demos with 2022’s Kitty. 

Note to future us: don’t do demos anywhere near grass… cleaning it out of transmissions isn’t fun. 

All in all, thank you to the Burbank Young Professionals for having us! We look forward to working with more organizations to promote robotics across Burbank! 

— Luci, Captain of Team 980